Laenen Music & Electronics

• Stream-line ontwerp
• Interne oplaadbare batterij
• 30 Patronen op te slaan
• IP20 klassificering
• 12Vdc adapter aansluiting
• Digitale display

Controller for stroboscope FL1800 -  FL 045 - Zapstrobes

• 4 Channel Strobe controller
• Analog and DMX(2ch) outputs!
• Manual and sound activated modes
• 10 built-in chases
• Single flash, Full on, Blackout
• Adjustable speed
• Adjustable dimmer (DMX only)
• Built-in microphone
  
  

Product Omschrijving

• Multifunctionele handcontroller, compatibel met heel wat van onze lichteffecten.
• Functies hangen af van het aangesloten lichteffect

Verschillende werkmodi:

4 of 8 kanaals licht modulator voor LED projectoren, voorzien van heel wat muziekgestuurde programma’s.

Vaste kleurmodus: Directe toegang tot 9 voorgeprogrammeerde kleuren.

Statische looplicht modus: 12 verschillende kleurlooplichten met handmatige snelheidsbediening.

Muziekgestuurd looplicht modus: 12 verschillende kleurlooplichten in het ritme van de muziek.

Spectrum mix: 32 verschillende spectrum mix kleuren inclusief trage kleurovergangen.

Regelbare snelheid en dimmen met kleurovergangen.

Volautomatische DMX-adressering tot 120 LED Projectoren!

Verduistering en “volledig aan” functie.

Power Input: DC 9V 300mA minimum.

AC/DC Power adapter: AC 240V, 50Hz to 9Vdc / 300mA (or more)

DMX output: 3pin XLR

Audio input: None, internal microphone

Size: 21,0 x 14,0 x 4,6cm

Weight: 930 grams

SM1612:

• 192 DMX channels 12 Fixtures of 16 channels each (best used with fixtures having up to 8 channels)
• 30 Banks of 8 programmable scenes (total = 240 scenes)
• 6 Programmable chases of 240 scenes
• 8 Sliders for manual control of channels
• Assignable joystick for ease of use
• File Dump allows data to be sent or received between two units
• Auto mode program controlled by speed and fade time sliders
• Fade time/Assign fade time
• Reversible DMX channels allows fixture to react in opposition to others in a chase
• 8 channel or 16 channel mode
• Fine adjustment for joystick pan and tilt
• Blackout master button
• Manual Override button to grab any fixture on the fly
• Built in microphone for music triggering
• MIDI control over banks, chases and blackout
• DMX Polarity selector
• Power failure memory

• Perfect for use in: retail stores, commercial displays, architectural lighting, indoor and outdoor decoration, clubs, pubs, mobile DJs, trussing, …
• Each TUBELED™ uses 144 high efficiency leds.
• Suitable for outdoor use due to IP44 protection grade
• Direct mains input, no extra power supplies needed!
• Up to 4000 tubes can be connected to the controller
• 38 preprogrammed patterns
• Auto mode scans all patterns automatically
• Pattern selection by DMX512: pattern selection, speed, interval, strobe
• RGB color mixing, controlled by DMX512 (dimming of red, green and blue colors)
• Adjustable strobe function
• Adjustable speed and interval time for most patterns
• Auto save function: saves the last working mode for all patterns individually.
• Extended life span: 50000 - 100000 hours for the leds
• Low power consumption (P<12W)
• Solid aluminum holders for wall fixing included

10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

6 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

Specifications:

• Total output channels: 16 x 2 (pages)

• Manual Mode

• Built-in chase

• Adjustable speed: 0,1 sec - 10 min.

• Adjustable fade time: 0-100 %

• Output connector: 3 pole Female XLR

• Dimensions: 540 x 100 x 190 mm (LxWxH)

• Weight: 2,8 kg

Specifications

• Power Supply 12V/ 500mA (included)

• 3 DMX Channels

• 9 preset colours

• DMX-512

• Sound Control

• Strobe function

• Chases

• Master Dimmer

Power supply: AC 12V- 500mA

Power consumption: 20 Watt

Power connector: Adapter (included)

Chases: 16 with 99 steps

Scenes: 16

Fixtures: 4

DMX-512: XLR 3 pole

Dimensions: 370 x 160 x 60 mm (LxWxH)

Weight: 1,9 kg

The Light Jockey is a DMX-512/MIDI-Controller for 8 dimm- and 8 switch channels. This device provides 30 pre-programmed chases and 30 free programmable scenes/chases. Furthermore, there are 16 free programmable (add-)scenes as well as add/kill-function, masterdimmer, auto-fade/speed fader and more useful functions. The perfect DJ Lightcontroller for you!

With the Showtec Foot-controller R-4 Pro (optional), all 16 memories can be recalled by two (UP/DOWN) buttons, and two more buttons to create "full-on" and "black-out". The desk will start in the same mode and with the same running program, in which it was, when it was switched off. (eg when using a time-clock). All memories can be downloaded on a special Showtec 128MB USB-memory-stick (optional !) and loaded to another Showtec Light Jockey-24 or send by e-mail. Due to its clear and compact design this is an easy to use and ideal light-desk for the multimedia-trade, 'live' bands, schools, rental companies and discotheques.

9 Ch. DMX-Controller with 4 dimming-controls and 1 master-control, 4 switch- and a controllable AUX channel. 12 pre-programmed memories are available, and all memories are also programmable. The desk will start in the same mode and with the same running program, which has been set when it was switched off (eg. when using a time-clock). Due to its clear and compact design this is an easy to use and ideal light-desk for musicians, DJ, and rental companies.

13 Ch. DMX Controller with 8 dimming-controls and 1 master-control, 4 switch- and a controllable AUX channel. 16 pre-programmed memories are available, and all memories are also programmable. All memories can be easily recalled with 16 buttons, one by one (single), as mix or in a sequence. The desk will start in the same mode and the same running program which has been set when it was switched off. (eg. when using a time-clock). Due to its clear and compact design this is an easy to use and ideal light-desk for the multimedia-trade, small 'live' bands, schools and rental companies.

Technical Info

• Power Supply 240V 50Hz

• Power Consumption 3500W

• Lamp: HTI-150

• Fuse F5A (per channel)

• Max total load 16A

• DMX-512

• 16 built-in programs

• Schuko outlets

• Dimensions: 210 x 72 x 260mm

• Weight 2,85 kg

• Music-controlled
• Schuko Outlets
• DMX-512 4CH. Dimmer pack 16 built-in programs.
• Chasing speed / Stand-alone function
• Connector: 3p XLR male & female
• Channel Output: 5A / CH., Total 16A.
• Dimensions: 210x72x260 mm (LxWxH)
• Weight: 2,84 Kg

The Scanmaster 2 MKII is the updated version of the already popular Scanmaster 2. It can control 12 scanners with a maximum of 16 DMX addresses per scanner. 240 programmable scenes are available and are ready for playback by 30 banks with 8 scenes and 12 complete chase-programs. The Scanmaster 2 MKII is equipped with an USB slot which can hold an external DJ light or a dedicated memory stick to store your programs and scenes and standard equipped with a joystick.

The Showmaster 24 is a 2-banks 12 fader, 1-bank 24 fader mixing console, it controls DMX and has also the capability to be used with MIDI protocol to allow real-time programs. The Showmaster 24 controls 2x12 channels (single bank) or 24 channels. The Showmaster 24 can program 48 scenes or chases of 999 steps or a loop with a total of 11988 steps. Programs can be run automatically or by external or internal musicinput. It is also possible to control your lightshow by the built-in MIDI-interface to allow a real-time live-show to your music.

This new innovative T-bar provides you with the same professional specifications as the regular T-4 bar. However, due to its unique design it is now possible to adjust the horizontal positioning of the attached lightunits. This enables you to have a more flexible light-design and a better distribution of the available lightsources.

Switch for flash, standby and audio power: 240/50Hz.

• Controller with speed controller
• Dimmer function
• Stand-by button
• Music controlled by internal mic

• metal casing

• 2 leds in front panel (power and usb link)

• usb link with computer

• dmx output for lighting equipment

• thermal protection on dmx ground

This interface can play a "dynamic" scene for 512 dmx channels, without computer !

• USB - DMX cable

• led for dmx output

• max 100 dmx channels

• max 10 fixtures

• 3D rendering only while interface is not connected

• max 20 scenes running together

• software downloadable from internet